Initial Settings Menu Using The Initial Settings Menu; Digital Audio Out Settings; Digital Out - Pioneer DVD-V5000 Operating Instructions Manual

Initial Settings menu
Chapter 5
Initial Settings menu
Using the Initial Set-
tings menu
The Initial Settings menu is where you can set
preferences for language, audio and video
output, and so on.
If a menu option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the disc,
then change the setting.
1 Press HOME MENU and select "Initial
Settings" from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
The language options shown in the on-
screen display illustrations on the following
pages may not correspond to those
available in your country or region.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Video Adjust
Disc Navigator
Digital Audio Out set-
tings

Digital Out

You only need to make this setting if you
connected this system to an AV receiver (or
other component) using the digital output.
• Default setting is On.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Option MPEG Out
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On.
05
On
Off
19