Connecting To An Av Receiver; Connecting Using Hdmi (Dv-490V Only) - Pioneer DV-393-S Operating Instructions Manual

02 Connecting up

Connecting to an AV receiver

To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You'll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the DIGITAL AUDIO OUT
COAXIAL jack on this player to a coaxial
digital input on your AV receiver.
AV receiver
HDMI
OUT
COAXIAL
DIGITAL AUDIO OUT
Use a coaxial cable (similar to the supplied
video cable) to connect the COAXIAL DIGITAL
AUDIO OUT jack to a coaxial input on your AV
receiver.
2 Connect the analog AUDIO OUT L/R and
VIDEO OUT jacks on this player to a set of
analog audio and video inputs on your AV
receiver.
14
En
DIGITAL IN
(COAXIAL)
AUDIO OUT
VIDEO OUT
P
B
L
R
P Y
R
COMPONENT VIDEO OUT
AV receiver
P
B
HDMI
OUT
COAXIAL
P R
DIGITAL AUDIO OUT COMPONENT VIDEO OUT
• You can use the SCART AV connector, or
the S-video or component video jacks to
connect to the AV receiver if you prefer.
Connecting using HDMI (DV-
490V only)
If you have a HDMI equipped monitor or
display, you can connect it to this player using
a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible with,
including DVD-Video, Video CD/Super VCD,
CD and MP3.
1 Use an HDMI cable to connect the HDMI
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible
monitor.
HDMI
connector
P
B
HDMI
OUT
COAXIAL
P
R
DIGITAL AUDIO OUT
COMPONENT VIDEO OUT
AUDIO/
VIDEO IN
VIDEO OUT AUDIO OUT
L
R
Y
HDMI-compatible display
VIDEO OUT AUDIO OUT
L
R
Y