Connecting Up; Easy Connections - Pioneer DV-393-S Operating Instructions Manual

Connecting up

Chapter 2
Connecting up

Easy connections

• Before making or changing any connections, switch off the power and disconnect the power
cable from the AC outlet.
• The setup described here is a basic setup that allows you to play discs using just the cables
supplied with the player. In this setup, stereo audio is played through the speakers in your TV.
• The following illustrations show the DV-490V, but connections for the DV-393 are the same
except where indicated.
TV
P B
HDMI
OUT
COAXIAL
P R
DIGITAL AUDIO OUT
COMPONENT VIDEO OUT
Yellow
Important
• This player is equipped with copy protection technology. Do not connect this player to your TV
via a VCR using audio/video or S-video cables, as the picture from this player will not appear
properly on your TV. (This player may also not be compatible with some combination TV/VCRs
for the same reason; refer to the manufacturer for more information.)
• When connecting to your TV as shown above, do not set the Component Out setting (See
Video Output settings on page 35) to Progressive.
A/V IN
AUDIO OUT
VIDEO OUT
L
R
Y
White
Red
AV CONNECTOR (RGB) TV/AV Receiver
To power
outlet
02
11
En