Setting Up The Player For Your Tv; Setting The Language Of This Player's On-Screen Displays - Pioneer DV-393-S Operating Instructions Manual

Getting started
Note
• From here on in this manual, the word
'select' generally means use the cursor
buttons to highlight an item on-screen,
then press ENTER.
Setting up the player for your
TV
If you have a widescreen (16:9) TV, you should
setup the player so that the picture will be
presented correctly. If you have a conventional
(4:3) TV, you can leave the player on the default
setting and move on to the next section.
1 Press HOME MENU and select 'Initial
Settings'.
Initial Settings
2 Select 'TV Screen' from the 'Video
Output' settings.
Initial Settings
Digital Audio Out
TV Screen
Video Output
Component Out
AV Connector Out
Language
Display
Options
3 If you have a widescreen (16:9) TV,
select '16:9 (Wide)'.
If you have a conventional (4:3) TV, you can
change the setting from 4:3 (Letter Box) to 4:3
(Pan & Scan) if you prefer. See Video Output
settings on page 35 for more details.
4 Press HOME MENU to exit the menu
screen.
Setting the language of this
player's on-screen displays
This sets the language of the player's on-
screen displays.
1
Settings'.
2
'Display' settings.
3
The on-screen language will change according
to your selection.
4
4:3 (Letter Box)
4:3 (Pan&Scan)
screen.
16:9 (Wide)
Press HOME MENU and select 'Initial
Initial Settings
Select 'OSD Language' from the
Initial Settings
Digital Audio Out OSD Language
Video Output Angle Indicator
Language
Display
Options
Select a language.
Press HOME MENU to exit the menu
04
English
français
Deutsch
Italiano
Español
19
En