Hardware Setup - Better Music Builder VM-62U Beta Operating Instructions Manual

HARDWARE SETUP

Set Up
AUDIO OUTPUT CONNECTION:
There are three rear audio outputs as shown in the below diagram:
1. Mic 2 Balanced Output
Mic 2 Balanced Output is balanced audio output for MIC 2 using XLR
connection. MIC 2 effects can be controlled without affecting MIC 1 effects.
2. Mic 1 Balanced Output
Mic 1 Balanced Output is balanced audio output for MIC 1 using XLR
connection. MIC 1 effects can be controlled without affecting MIC 2 effects.
3. Mic 1 & 2 unbalanced Output
Unbalanced audio output for MIC 1 & MIC 2 using 1/4" connection. MIC 1
and MIC 2 shares a single signal. To produce different effects on two
microphones, MIC 1 and MIC 2 need independent signals using separate XLR
connections.
Model No.: VM-62U Beta
CALIFORNIA, UNITED STATES OF AMERICA
w w w. B e t t e r M u s i c B u i l d e r. c o m
ENGINEERED AND DESIGNED IN U.S.A.
DC-POWER
18.5V 600mA
ANTENNA-B
MIC 2 BALANCED OUTPUT
We recommend using balanced XLR connections if the distance between the
microphone receiver and the mixer is more than 10 feet. The grounding of the
balanced XLR connection delivers better quality signal by reducing noise.
Recommend
362161204500
MIC 2 BALANCED
1
(BALANCED XLR)
AUDIO OUTPUT
TRUE DIVERSITY
MIC 1 BALANCED
UNBALANCED
2
MIC 1 BALANCED OUTPUT
(BALANCED XLR)
5
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MIX
MIC 1 & 2
ANTENNA-A
3
MIXED OUTPUT
(MIC 1 & 2 UNBALANCED)