6.3 Factory Default
When you press [OK] on the "Factory Default"
item:
1.
A dialogue box will occur where you need
to enter the password.
2.
After you input the correct password a
warning message will be displayed like the
one beside.
Note: Default password is "0000".
If you select "Yes" then all changes you made will be reset to default values.
3.
Make sure you really want to do this.
4.
Press [Exit] in both steps will close the window without resetting the
receiver.
6.4 Software Upgrade
When you enter to "Software Upgrade" menu,
you will see a screen like beside:
Press [CH▲/▼] to select the wanted item
1.
among USB-STB OTA Upgrade and Net
Upgrade.
2.
Press [OK] to enter the selected item.
6.4.1 USB-STB Upgrade
This option is for field personnel only.
28
Menu Settings