Table of Contents
Advertisement
3.3 Channel Setup
When you enter the "Channel Setup" menu
you will see a screen like beside:
1.
Startup Channel: Press [OK] to enter
"Startup Channel" menu to see the
screen like showed beside:
If you set of "Boot on Channel" to
"On" you can edit the following
two items. If the setting is "Off"
the box always starts with the
channel that was running when the box has been switched off.
On the "Mode" item you can
select "TV channel".
On "Startup Channel" item you
can open the channel list by
pressing [OK]. Then you can
select the channel of your choice.
Press [OK] again to confirm.
Channel Play type: Use [CH▲/▼] to select, press [OK] to enter "Channel
2.
Play Type" menu. Here you can select the "playing channels" as "All",
"Free" or "Scrambled" with [Vol◄/►].
If you select "Free" then all scrambled
3.
channels will be skipped when you change channels with [Vol◄/►].
Press [Exit] to leave the "Channel Setup" menu.
4.
17
Menu Operations
Advertisement
Table of Contents
