Allied Telesis AT003-HDR Manual page 27

 Duration: Here you can set the time you want to see or play this
channel. When the time is reached, whenever the system is in
Standby mode or On mode, the system will automatically switch to
the channel you select and play the channel for the duration time
you set. The minimum duration unit is one minute. After the
duration time, the system will automatically switch to Standby
mode.

When you select "Message"( reminding message) option in "Timer
Service" then you can enter additional data:
Wakeup Message: Press [Vol◄/►] to select the category

of the wakeup message from Birthday, Anniversary and General.

Wakeup Date: Use the [Number] buttons to input your wakeup
date.

On Time: Use the [Number] buttons to input your wakeup time. If
date and time are reached, no matter if the system is in standby
mode or in playing mode, it will automatically show a reminding
message. The message will be displayed on the screen until you
press [Exit] to close it.
 Duration: Here you can set the time you want to see or play this
channel. Once the date and time is reached, the system will
automatically switch to the channel you set here (this action will
occur when STB is in Standby mode or On mode).

After the duration time, the system will automatically switch to
Standby mode.

Press [Exit] to leave the "Timer" menu.
23
Menu Settings