Allied Telesis AT003-HDR Manual page 28

2. Local Time Setting: When you select
"Local Time Setting" and press [OK]
then you will see a window like the one
beside:

GMT Usage: This item is used to
set the time by using the time
from the cable signal. Press
[Vol◄/►] to change the setting.
 The "GMT Offset" item is only
available when "GMT Usage" is set to "On". Press [Vol◄/►] to set the
"GMT Offset" value. Every time you press the button the time offset will
be increased /decreased by half an hour.
 Summer: Press [Vol◄/►] to switch this function "On" or "Off".
 "Date" and "Time" items are only available when the "GMT Usage" is
set to "Off". Press [Vol◄/►] to select one item and use number
buttons to input time and date directly.
 Time Display: Press [Vol◄/►] to switch this function "On" or "Off".
NOTE: If the current channel provides the correct time information,
you will see the current time after you entered "Local Time Setting"
menu. If the channel doesn‟t provide time information, you have to
input the date and time information manually. Most channels support
the time signal.

Press [Exit] to leave the "Time" menu.
Sleep Timer: Select "Sleep Timer" item and press [OK] to set the sleep
3.
timer. You will see "Sleep timer OFF / Sleep timer 10 / Sleep timer 30 /
Sleep timer 60 / Sleep timer 90 / Sleep timer 120".
If you set a sleep time, the system will change to standby mode after the
chosen time period.
24
Menu Settings