Table of Contents
Advertisement
4.2 Transponder scan
When you enter to "Auto Scan" menu, there will display the screen like right:
1.
You have to set the parameters of
"First Frequency", therefore use the
number buttons of the RCU.
2.
You have to set the parameters of
"Second Frequency", therefore use
the number buttons of the RCU.
3.
You have to set the parameters of
"Scan Mode", therefore use the
number buttons of the RCU.
NIT Search: Press [Vol◄/►] to switch
4.
this function "Yes" or "No".
Moving the highlight to "Search" item and press [OK] key to start scanning.
5.
In the "Auto Scan" menu, press [Exit] key to draw back from the scanning.
6.
5. System Setup
When you open the "System Setup" menu you will see a window as shown
here:
In "System Setup" menu:
Press [CH▲/▼] to select menu items
1.
among Language, TV System, Time &
Timer setting, OSD Setting, Parental
Lock, Power setting, TCP/IP Setting
and MAC Setting.
2.
Press [OK] to open the selected item.
5.1 Language
After selecting the "Language" menu you
will see a window as shown here:
Menu Language: Press [Vol◄/►] to
1.
select from the many available menu
languages, including: English, German,
20
Menu Settings
Advertisement
Table of Contents
