Power Setting - Allied Telesis AT003-HDR Manual

Menu Lock: If Menu Lock is set to "Yes", then you need to enter the
2.
password every time you want to open the menu. If set to "No" then you
can open the menu without entering the password first.
Channel Lock: If set to "Yes", then you need to enter the password before
3.
you can see those channels which have been marked as locked channels
in the channel menu. If set to "No" then even those channels can be
selected without entering the password first.
4. New Menu Password: Here you can change the existing password. You
should do this after you set up the receiver the first time and every time you
think that your password is known by unauthorized persons. To change the
password, enter the new password in the "New Menu Password" item and
repeat the same one in the "Confirm Password" item. If the passwords are
not identical then you will see a warning message. If you entered the same
new password in both fields, then you will see the message "Saving Data,
Please Wait...". From now on you need to use the new password to open
locked menus or locked channels.
NOTE: The default password is 0000.
"New Chan(channel) Password" operation is same as "New Menu
5.
Password" described above.
Press [Exit] to leave the "Parental Lock" menu.
6.

5.6 Power setting

When you select this option, you will see a
screen like beside:
1. Automatic Standby: press [OK] to
open the "Automatic Standby" menu.

Automatic
[Vol◄/►] to select "Off" and "On".
 Time: Press [Vol◄/►] to select
"1hr" ~ "8hr".
Standby: Press
26
Menu Settings