7.4.1.1 Gliding screen
Upper centre: Stall factor, see set up menu.
Upper right: Time
Lower centre: engine time for this flight
7.4.1.2 Powered flight screen
Upper centre:
a) With the engine running the engine RPM will be displayed.
When exceeding the max. engine RPM the message "Engine Speed"will be
displayed and the "Warning" symbol will blink, after verifying this
message the RPM display is blinking.
b) As long as the engine is not running symbols showing the position of the
powerplant will be displayed. In addition if the powerplant is moving, an
arrow will be displayed showing if the powerplant is being retracted or
extended (not when moving the powerplant via the manual switch). As
soon as the powerplant is completely retracted (limit switch must be
activated) the screen changes to the gliding screen. .
In case the propeller is not in the position for retraction a short propeller
(side view) will be displayed. In position for retraction a long propeller will
be displayed.
powerplant extended,
propeller in position for retraction
powerplant in position propeller stopper extended
propeller not in position for retraction
Issued: October 2012
Copyright DG Flugzeugbau GmbH - any copy or publishing prohibited
Flight Manual DG-1000M
propeller not in position for retraction
TN1000/22
propeller in position for retraction
7.12