Maintenance - Genesis GCS545C Operator's Manual

ACCESSOrIES
recommended accessories for this tool:
Model # Image
GACSB451
GACSB452
GAPCS203

MAINTENANCE

CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. use clean cloths to remove dirt, dust, oil, grease, etc.
WArNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings,
brushes, commutators, etc. Consequently, we do not recommended using this tool for extended work on these
types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool
using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
Description
24 Teeth TCT Premium
Saw Balde
60 Teeth HSS Saw Balde
Rip cutting track system
Do not at any time let brake fluids, gasoline, petroleum-based
Appliaction
for cutting wood, plastic and other soft
materials
for cutting drywall, wood, aluminum
and other non-ferrous thin sheet metal
• Make super accurate rip cuts up to 48"
• Add addtional tracks for even longer cuts
13