Filter Type Change - Philips AC2882 User Manual

Filter type change

1
Touch and
for 3 seconds to enter the filter type
change mode (fig.|).
» Code (A3) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2
Touch to select the filter code of
the new filter you will use (fig.).
3
Touch and hold
confirm the filter code of the new
filter (fig.€).
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4
Code (C7) of the Nanoprotect
filter AC displays on the screen
after the first filter type has been
changed(fig.}).
5
Touch to select the new filter
code of the second filter (fig.).
6
Touch and hold
confirm the filter code of the second
filter and exit the filter type change
mode (fig.‚).
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
12 EN
simultaneously
for 3 seconds to
button,
for 3 seconds to
button,
Note
• Refer to the separate leaflet that comes
with the filter for more information on
different filter combinations for your
choice.