Table of Contents
Advertisement
Remote Control
POWER button (p. 17)
EJECT button (p. 23)
TV/VCR button (p. 17)
CH (CHANNEL) ∂/ƒ buttons (p. 29)
MENU button (p. 15)
∂/ƒ/ß/© button (p. 17)
CANCEL button (p. 30)
*Numbered buttons (p. 19)
*100, ENT. /AM/PM button (p. 19)
*PLAY button (p. 23)
*REW button (p. 24)
REC button (p. 26)
TAPE SPEED button (p. 26)
AUTO REPEAT button (p. 36)
SLOW button (p. 24)
RENTAL REWIND button (p. 38)
• If the
button is pressed while the light up buttons are illuminated, they will remain illuminated for an additional 10
seconds.
Inserting the Batteries
Make sure that the batteries have been properly installed first. Fit three
batteries type "AA". If the remote control stops working, fit new batteries.
Ensure the batteries are fitted correctly, matching the polarities (j/k) indicated
in the remote control.
• After changing the batteries in the remote control, the code settings for the TV,
cable box and Digital Satellite Receiver must be re-entered.
• The operating life of the batteries will shorten if the Light Up function is frequently used.
• The operating life of the batteries will shorten if the Remote Pager function is frequently used.
• Do not subject the remote control to shock, water or excessive humidity.
• The remote control may not function if the VCR sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix brands in use.
• Remove the batteries if the remote control will not be operated for an extended period of time.
• If the remote control does not function properly when new batteries are installed, remove the batteries and keep pressing
any button for 10 seconds before re-installing them.
8
VIDEO CASSETTE RECORDER
Remote Control Mode Select
buttons (VCR, TV, CABLE/SAT.)
• USED TO SELECT THE
COMPONENT (VCR, TV, CABLE
BOX/SAT.) TO BE OPERATED.
ON SCREEN button (p. 15)
DISPLAY button (p. 7)
VOL (VOLUME) j/k buttons
VCR Plus+ button (p. 30)
SET button (p. 17)
ZERO BACK button (p. 36)
SKIP SEARCH button (p. 37)
REPLAY button (p. 37)
TAMPER PROOF button (p. 38)
INPUT button (p. 28)
*FF button (p. 24)
PAUSE/STILL button (p. 24)
*STOP button (p. 23)
j/k buttons
(SLOW j/k, DPSS j/k) (p. 37)
button
• Press the button to illuminate
the light up buttons (indicated
with the
*
mark) for 10
seconds
Advertisement
Table of Contents
