Playback; Inserting A Video Cassette - Sharp VC-H818U Operation Manual

Playback

Inserting a Video Cassette

Gently insert the video cassette into the cassette compartment. The VCR turns on automatically and "
appears on the multi-function display. If the cassette is inserted incorrectly, the loading system will not function.
Do not force the cassette into the VCR.
To remove the cassette, press EJECT during stop mode.
Playback
• Turn on the TV and select the video channel. (See Setting the 3 ↔ 4 Output Channel Selector.)
EJECT
POWER
! Press POWER to turn on the VCR.
@ Insert a cassette.
# Press PLAY. (The automatic tracking control system engages and "PLAY" flashes on the TV screen for a
few seconds. See Automatic Tracking Control System.)
$ To stop playback, press STOP. (If the tape reaches its end, the VCR will automatically rewind the tape to
the beginning, eject the cassette, and turn off the power.)
• If noise should remain on the TV screen after tracking adjustment has been completed by the Automatic Tracking Control
System, use the manual tracking mode.
• Press CH ∂/ƒ during playback mode to change to manual tracking mode. Adjust the tracking using CH ∂ /ƒ until the
noise is minimized or eliminated.
• For tapes recorded in EP on another VCR that still have vertical jitter even after manual adjustment, hold down PLAY for
about 2 seconds. (On screen display may be blurred.) Ejecting the tape or turning off the power will return playback to its
normal mode.
Notes for S-VHS tape
• Playing back with S-VHS high quality picture is not available.
• Picture noise or distortion may appear on the screen during playback in the SLOW or STILL mode.
• S-VHS recording is not available.
POWER
EJECT
PLAY
STOP
STOP
PLAY
"
VIDEO CASSETTE RECORDER
23