Accumulation Acceptable Condition Setting 1; Accumulation Acceptable Condition Setting 2 - Excell PCH3 User Manual

EXCELL PRECISION CO., LTD.

3-1-11 Accumulation Acceptable Condition Setting 1

Press key
MC
Enter parameter 00~01
Press key to
MC
save the setting
Default setting:
 The scale accepts accumulation only when being stable.
 The scale accepts accumulation no matter its being stable or not.

3-1-12 Accumulation Acceptable Condition Setting 2

Press key
MC
Enter parameter 00~04
Press key to
MC
save the setting
Default Setting:
 Only when the weight returns to zero, the scale accepts the next accumulation value. If
the weight is near zero band, please adjust the setting in
 The weight is no need to return to zero, the scale accepts the next accumulation value..
That means when no weight on platter, the weight can be accumulated continuously.
 The weight must return to zero (gross = 0), and the scale can accept the next
accumulation value.
 Press
key not to accumulate the value, at the same time, RS-232 transmits the
M+
data.
 The weight should be less than 1/4 d of zero point, and the scale can accept the next
accumulation value.
03004035
Previous setting
.
Previous setting
22
.
ZSME200000058