Skoda Rapid Operating Instructions Manual page 161

Preparations for using the breakdown kit
Sealing and inflating the tyre
Notes for driving with tyre repaired
Use the breakdown kit to reliably repair tyre damage caused by foreign bodies
or a puncture with diameters up to approx. 4 mm.
A repair made using the breakdown kit is never intended to replace a perma-
nent repair on the tyre. Its purpose is to get you to the nearest specialist ga-
rage.
The wheel must not be removed during repair.
Do not remove foreign bodies, which have penetrated the wheel profile from
the tyre (e.g. screws or nails).
Immediately replace the tyre that was repaired using the breakdown kit, or
consult a specialist garage about repair options.
WARNING
The sealant is hazardous to heath. Remove immediately if it comes into
■
contact with the skin.
Observe the manufacturer's usage instructions for the breakdown kit.
■
For the sake of the environment
Used sealant or sealant whose expiry date has passed must be disposed of in
accordance with environmental protection regulations.
Note
A new bottle of sealant can be purchased from ŠKODA Original Parts.
158
Do-it-yourself
159
Components of the puncture repair kits
159
160
Fig. 155 Principle sketch: Components of the breakdown kit

Read and observe
Components of the kit » Fig. 155
Sticker with speed designation "max. 80 km/h"/"max. 50 mph"
1
Valve remover
2
Inflation hose with plug
3
Air compressor
4
Button for releasing the tyre pressure
5
12 volt cable connector
6
Tyre inflation hose
7
Tyre inflation pressure indicator
8
ON and OFF switch
9
Tyre inflator bottle with sealing agent
10
Replacement valve core
11
The valve remover has a slot at its lower end which fits into the valve core.
2
The kit is located in a box under the floor covering in the luggage compart-
ment. This contains a sealing means and an air compressor.
Note
The declaration of conformity is included with the air compressor or the log
folder.
on page 158 first.