Skoda Rapid Operating Instructions Manual page 140

Hide thumbs Also See for Rapid:
Table of Contents

Advertisement

Opening and closing the bonnet
Fig. 135 Opening the bonnet
Read and observe
and
Open flap
Open the driver door.
Pull the release lever underneath the dash panel in the direction of the ar-
row
» Fig.
135.
1
Before opening the bonnet, ensure that the arms of the windscreen wipers
are correctly in place against the windscreen, otherwise the paintwork on the
flap could be damaged.
Press the release lever in the direction of the arrow
The flap is then unlocked.
Grasp the bonnet catch and lift in the direction of arrow
Remove the lid prop in the direction of arrow
Secure the open flap inserting the end of the post into the opening in the di-
rection of arrow
.
5
on page 136 first.
.
2
.
3
from the holder.
4
Close the flap
Lift the bonnet.
Decouple the bonnet support and press into the holder designed to hold it.
Let the bonnet drop into the lock carrier lock from a height of around 20 cm –
do not push it in.
Check that the bonnet is closed properly.
WARNING
If you notice that the lock is not properly engaged while driving, stop the
vehicle immediately and close the flap – risk of accident!
Make sure that when closing the bonnet, no body parts are crushed -
there is danger of injury!
CAUTION
Never open the bonnet by the locking lever
Engine compartment overview
Fig. 136 Principle sketch: Engine compartment
Read and observe
and
Arrangement in the engine compartment
Coolant expansion reservoir
A
Windscreen washer fluid reservoir
B
Engine oil dipstick
C
Engine oil filler opening
D
» Fig.
135.
on page 136 first.
» Fig. 136
Inspecting and replenishing
141
138
139
140
137

Advertisement

Table of Contents
loading

Table of Contents