Skoda Rapid Operating Instructions Manual page 116

The tyre pressure monitoring function (hereinafter referred to only as a sys-
tem) monitors the tyre pressure while driving.
When changing the tyre inflation pressure, the warning light illuminates in
the instrument cluster and an audible signal is heard.
Information on the procedure for the notification of change of tyre inflation
pressure » page 34.
The system can only function properly if the tyres have the prescribed inflation
pressure and this pressure values are stored in the system.
WARNING
Having the correct tyre inflation pressure is always the driver's responsi-
■
bility. Tyre pressure should be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
■
e.g. in case of sudden tyre damage.
Save tyre pressure values

Read and observe on page 113 first.
The tyre pressure values are always stored in the system, if one of the follow-
ing events occurs.
›
Change of tyre inflation pressure.
›
Change one or more wheels.
›
Change in position of a wheel on the vehicle.
›
The warning light in the instrument cluster.
The storage of the tyre pressure values depends on equipment, either in the
infotainment or by pressing a button.
WARNING
Before storing the pressures, the tyres must be inflated to the specified in-
flation pressure » page 147. When storing incorrect pressure values, the
system could possibly not issue any warnings, even with a too low tyre
pressure.
CAUTION
The tyre pressure values are to be saved every 10,000 km or once annually to
ensure correct system functioning.
» page 147.
Save tyre pressure values and infotainment display

Read and observe on page 113 first.
›
Inflate all the tyres to the specified pressure.
›
Switch on the ignition.
›
The Infotainment switches on.
›
Press the button in the Infotainment and then in the display the function

keys one after the other , Vehicle status.
›
By using the function keys   select the menu item Tyre Pressure Loss Indi-
cator.
›
Press the function key  SET » Fig.
In addition, follow the instructions that appear on the display.
A message in the display informs about the storage of the tyre pressure val-
ues.
Note
When a warning light in the instrument cluster appears, the affected tyre
can be displayed on the infotainment
Fig. 119
Button for storing the pressure
values / Example of the display:
the system indicates a tyre pres-
sure change front right
119.
» Fig. 119.
Assist systems
113