Diagnostics; Radio Status - ProSoft Technology RadioLinx RLXIB-IHN User Manual

RadioLinx Configuration Manager
User Manual
4.3

Diagnostics

The Main Diagnostics tab shows basic information about the radio.
Parameter
Unit Up Time
Firmware

4.3.1 Radio Status

Parameter
MAC ID
Link Status
Parent
Link Time
RSSI
SNR
Poll Interval
Start
Stop
Page 86 of 171
Description
The length of time the radio has operated since the last system power-
up or last system reset.
The version of firmware currently installed. All radios on the network
must have the same firmware versions installed. For more information
on firmware versions, refer to Upload Code (page 101).
Description
The MAC address of the selected radio. The MAC ID is also printed on
the side of the radio.
 Master: The radio is configured as a Master.
 Connected: The radio is currently connected to a Parent
 Associated: The radio is associated with a Parent, but is not
currently connected
 Connecting: The radio is attempting to connect to a Parent
 Disconnected: The radio is unable to connect to a Parent
The MAC address of the parent radio to which the selected radio is
linked.
The length of time the radio has been continuously connected to a
parent radio.
Strength of the signal from the Parent radio, in dBm.
The signal-to-noise ratio is displayed here in dB. Refer to
Understanding Signal to Noise Ratio (page 47) for more information on
how to interpret this value.
Enter the interval in seconds to refresh the status information on this
page.
Click to start refreshing the page.
Click to stop refreshing the page.
RLXIB-IHN ♦ 802.11n
Industrial Hotspot
ProSoft Technology, Inc.
May 23, 2011