ProSoft Technology RadioLinx RLXIB-IHN User Manual page 82

RadioLinx Configuration Manager
User Manual
The MIB (Management Information Base) fields settings on this tab populate the
current SNMP system information of the RLXIB-IHN.
Parameter
SysContact
SysLocation
SysName
Click Apply to save your changes.
Click Clear to discard your changes.
Access Control List
The SNMP Access Control List is a table of access rules that enables read-only
or read-write access for select IP addresses in a defined SNMP agent's
community.
Parameter
IP Address
Subnet Mask
Community
Access Type
!(Edit)
The actions that can be taken on SNMP access control rules are:
Parameter
Select All
Delete
Add
Page 82 of 171
Description
The name of the contact person for this device.
Examples
admin, John Doe.
The physical location of the device
Example
Rack #2, 4th Floor.
A name given for easy identification of the device.
Description
The IP Address of the specific SNMP manager or trap agent on which
to create an access rule.
The network mask used to determine the list of allowed SNMP
managers.
The community string to which the agent belongs to. Most agents are
configured to listen for traps in the Public community.
The SNMP manager or trap agent can either be allowed to read and
modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
The Edit button will link to the SNMP Access Control Configuration
page, allowing you to make changes to the selected access control
rule.
Description
Selects all SNMP access control rules in the table.
Deletes the selected SNMP access control rule or rules.
Clicking this button will link to the SNMP Access Control Configuration
page.
RLXIB-IHN ♦ 802.11n
Industrial Hotspot
ProSoft Technology, Inc.
May 23, 2011