Figure - Craftsman 247.88976 series Operator's Manual

Overhead Chute Control (w/ Chute Control Rod)
1. Remove wing nut and hex screw from chute control head and clevis pin and
cotter pin from chute support bracket. Position chute assembly (forward-
facing) over chute base. See Figure 13.
Chute
Chute Base

Figure 12

Chute Control Head
Chute Support Bracket
Figure 13
ASSEMBLY
2. Place chute assembly onto chute base and secure chute control head to chute
support bracket with clevis pin and cotter pin removed in Step 1. See Figure
14.
3. Finish securing chute control head to chute support bracket with wing
nut (a) and hex screw (b) removed in Step 1. See Figure 15.
11
Figure 14
Figure 15