Management Vlan Settings - EnGenius EAP900H User Manual

Management VLAN Settings

This page allows you to assign a VLAN tag to the packets. A
VLAN is a group of computers on a network whose software
has been configured so that they behave as if they were on
a separate Local Area Network (LAN). Computers on VLAN
do not have to be physically located next to one another
on the LAN.
Note: Only applicable in Access Point and WDS AP mode.
Profile Isolation: Restricted client to communicate with
different VID by selecting the radio button.
VLAN ID: Specify the VLAN tag for each profile.
Management VLAN ID: If your network includes VLANs,
you can specify a VLAN ID for packets pass through the
Access Point with a tag. Otherwise, select No VLAN tag.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
Note:
1. If you reconfigure the Management VLAN ID, you
may lose your connection to the EAP900H. Verify that
the DHCP server supports the reconfigured VLAN ID
and then reconnect to the EAP900H using the new IP
address.
2. Clicking Accept does not apply the changes. To apply
them, use Status > Save/Load (see section 5.1).
44