Wireless Mac Filtering - EnGenius EAP900H User Manual

Wireless MAC Filtering

Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones, etc.) according to their MAC addresses. You
can manually add a MAC address to restrict the permission
to access EAP900H. The default setting is Disable Wireless
MAC Filter.
Note: Only applicable in Access Point and WDS AP mode.
ACL Mode: Determines whether network access is granted
or denied to clients whose MAC addresses appear in the
MAC Address table on this page. Choices are: Disabled,
Deny MAC in the list, or Allow MAC in the list.
MAC Address: Enter the MAC address of the wireless client.
Add: Click Add to add the MAC address to the MAC Address
table.
Delete: Delete the selected entries.
Apply: Click Apply to apply the changes.
38