Spanning Tree Setting - EnGenius EAP900H User Manual

Spanning Tree Setting

This page allows you to modify the Spanning Tree settings.
Enabling Spanning Tree protocol will prevent network loops
in your LAN network
Spanning Tree Status: Enable or disable the Spanning
Tree function.
Bridge Hello Time: Specify Bridge Hello Time, in seconds.
This value determines how often the device sends handshake
packets to communicate information about the topology
throughout the entire Bridged Local Area Network.
Bridge Max Age: Specify Bridge Max Age, in seconds. If
another bridge in the spanning tree does not send a hello
packet for a long period of time, it is assumed to be dead.
Bridge Forward Delay: Specify Bridge Forward Delay, in
seconds. Forwarding delay time is the time spent in each of
the Listening and Learning states before the Forwarding
state is entered. This delay is provided so that when a new
bridge comes onto a busy network, it analyzes data traffic
before participating.
Priority: Specify the Priority Number. A smaller number has
greater priority.
Save: Click Save to confirm the changes.
31