EnGenius EAP900H User Manual page 17

To attach the EAP900H to a ceiling using the
provided T-rail connectors:
1. Attach the T-rail connectors to the bottom cover of the
EAP900H using the provided short screws.
Note: Two sizes of T-rail connectors are included in the
mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm). If extra space is required to accommodate drop
ceiling tiles, use the provided spacers and long screws.
P2.6*10 Screw
Clip
2. Line up the connected T-rail connectors with an
appropriately sized rail and press the unit onto the rail
until it snaps into place.
Note: To protect your EAP900H, use the Kensington
security slot to attach a cable lock (cable lock is not
included).
P2.6*25 Screw
Clip
Spacer
17
T-Rail
Clips