Subscribe to Our Youtube Channel
Related Manuals for TSL MPA1-BD
Summary of Contents for TSL MPA1-BD
- Page 1 MPA1-BD Audio Monitoring Unit Handbook TSL Products Units 1-2, First Avenue, Globe Park, Marlow, Bucks, SL7 1YA Telephone +44 (0)1628 564610...
-
Page 2: Ec Declaration Of Conformity
United Kingdom Type of Equipment: Powered Loudspeaker Unit Model No: MPA1-BD Part Number: TSLP- MPA1-BD Date CE Mark Affixed: 4/2/08 I, the undersigned, declare that the equipment specified above conforms to the quoted Directives and Standards. Place: Maidenhead, England Signature:... - Page 3 MPA1-BD Issue 3...
- Page 4 Installation. Unless otherwise stated TSL equipment may be installed at any angle or position within an operating temperature range of 5° - 30° C . All TSL equipment conforms to the EC Low Voltage Directive: EC Low Voltage Directive (73/23/EEC)(OJ L76 26.3.73)(LVD).
- Page 5 WARRANTY, MAINTENANCE AND REPAIR All TSL equipment is guaranteed for one year from the date of delivery to the customer’s premises. If the equipment is to be stored for a significant period, please contact TSL concerning a possible extended warranty period.
- Page 6 • Symptoms of the fault (to include switch setting positions, input signals etc): Packing Please ensure that the unit is well packed as all mechanical damage is chargeable. TSL recommends that you insure your equipment for transit damage. The original packaging, when available, should always be used when returning equipment..
- Page 7 Contents Introduction Front Panel Controls Volume control Input select Phase Indicator General Notes Scale and Reference Level Setup Specifications MPA1-BD Issue 3...
- Page 8 Introduction The MPA1-BD is a 1RU x 200mm deep audio monitoring unit with two switched analogue, two AES inputs and intended for use as a close field monitor. The following features are standard: • Two switch selectable stereo analogue inputs.
- Page 9 Scale and Reference Level Setup The MPA1-BD allows the displayed scale and digital reference level to be set from the front panel. The unit may display either an EBU Digital or PPM scale and the reference level for the AES inputs may be set from -15dBFS to -24dBFS.
- Page 10 MPA1-BD Technical Specifications Power Supply Supply Voltage 12v DC Power Consumption Less than 30 Watts Physical Dimensions Height 44mm (1RU) Width 19” Rack Mount Depth 200mm Weight 6 kg Analogue Inputs 1 and 2 Connector Type XLR Female 3 pin. Pin 1 Ground, Pin 2 hot, Pin 3 cold.
Need help?
Do you have a question about the MPA1-BD and is the answer not in the manual?
Questions and answers