Table of Contents
Advertisement
Assembling the cymbal stands
8
Assembling the cymbal stands
16
Fold out or extend the legs of the straight and boom cymbal stands until they are as
stable as possible. After this, you fix the legs using the wing nut. The two cymbal
stands are of slightly different sizes.
The slightly larger bottom case is intended for the boom cymbal stand. We'll start
with this one first.
Push the centre and spacer tubes onto the bottom case and fix them with the wing
screws. Now push the boom through the joint and fix it temporarily with the wing
screw. We will make the final settings later on.
You mount the straight cymbal stand in a similar way to the boom one. In this case,
however, the cymbal is directly on the retractable spacer tube. You attach the cym‐
bals in exactly the same way as with the hi-hat-stand after positioning.
drum set
Hide quick links:
Advertisement
Table of Contents
