Adjusting Loudness; Using Subwoofer Output; Adjusting Subwoofer Settings - Pioneer KEH-P7020R Operation Manual

Multi-cd/dab control high power cassette player with rds tuner
Hide thumbs Also See for KEH-P7020R:
Table of Contents

Advertisement

Available languages

Available languages

Audio Adjustments

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
to select
AUDIO
Press
until
AUDIO
Loud
2 Press 5 to turn loudness on.
Loudness level (e.g.,
Loud Mid
display.
3 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)—
(mid)—
Low
Mid
4 Press ∞ to turn loudness off.
appears in the display.
Loud OFF

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press
to select
AUDIO
When the subwoofer controller setting is
, you cannot select
Control:EXT
until
appears in the display.
AUDIO
Sub-W1
2 Press 5 to turn subwoofer output on.
appears in the display.
Sub-W1 Normal
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.
3 Press 2 or 3 to select the phase of sub-
woofer output.
Press 2 to select reverse phase and
appears in the display. Press 3 to select normal
phase and
appears in the display.
Normal
.
Loud
appears in the display.
) appears in the
(high)
High
.
Sub-W1
S.W
. Press
Sub-W1
Rev.

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
to select the
AUDIO
When the subwoofer output is on, you can
select the
. Press
Sub-W2
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
(Hz).
2 Press 2 or 3 to select cut-off frequency.
Press 2 and
(Hz) is displayed. Press 3 and
50
(Hz) is displayed. Only frequencies lower
125
than those in the selected range are output
from the subwoofer.
3 Press 5 or ∞ to adjust the output level of
the subwoofer.
Each press of 5 or ∞ increases or decreases
the level of the subwoofer (e.g.,
Press 5 or ∞ until you see the desired value
displayed.
.
Sub-W2
until
AUDIO
Sub-W2 80
(Hz) or
50
125
to
).
+6
–6
En
Section
07
33

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents