Receiving Traffic Announcements; Responding To The Tp Alarm - Pioneer KEH-P7020R Operation Manual

Section
RDS
04
• The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
• can be turned on or off independently for
REG
each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a
TP
station.
TP
When you are tuned into a TP or enhanced other
network's TP station the
will light.
2 Press to turn traffic announcement
TA
standby on.
Press until
TA TA ON
tuner will standby for traffic announcements.
• To turn traffic announcements standby off,
press again.
TA
3 Use
VOLUME
a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
16
En
or enhanced other network's
indicator (
TP
appears in the display. The
to adjust the volume when
TA
4 Press while a traffic announcement is
TA
being received to cancel the announcement.
The tuner returns to the original source but
remains in the standby mode until
again.
Notes
• You can also turn on or off
menu that appears with the pressing of
.
FUNCTION
• The system switches back to the original
source following traffic announcement recep-
tion.
• Only TP and enhanced other network's TP
stations are tuned in during seek tuning or
BSM when TA is on.

Responding to the TP alarm

When a TP or enhanced other network's TP
station is lost due to a weak signal a series of
)
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network's TP station.
When listening to the tuner, tune in another
or enhanced other network's
TP
• When listening to sources other than the
tuner, the unit will automatically seek out a TP
station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.
is pressed
TA
in the setting
TA
station
TP .