F:\#Work#\Y3\eV\Harrier 7\Sagyo data\4573332111\4573332111XAVV750BTE17\01GB-
010book.book Page 14 Tuesday, November 24, 2015 9:51 AM
Select a contact from the name list/number
list in the phonebook. To search the desired
contact in alphabetical order from the name
Say a voice tag stored on the cellular phone.
(phone number input)
Enter the phone number.
Preset numbers (1 to 6)
Select the stored contact.
To store the contact, see "Presetting phone
numbers" (page 14).
*1 The cellular phone needs to support PBAP
(Phone Book Access Profile).
*2 Do not use the voice command function on the
cellular phone while it is connected to this unit.
*3 Voice command may not work depending on the
recognition specification of the cellular phone.
For details, visit the support site on the back
The phone call starts.
Presetting phone numbers
You can store up to 6 contacts in the preset list.
In the phone screen, select a phone
number that you want to store in the
preset dial from the phonebook.
The confirmation display appears.
Touch [Preset], then the desired preset
number (1 to 6).
The contact is stored to the selected preset
Available Operations During a
To adjust the ringtone volume
Press VOLUME+/– while receiving a call.
To adjust the talker's voice volume
Press VOLUME+/– during a call.
To adjust the volume for the other party (Mic
During a handsfree call, touch
Gain] to [Low], [Middle] or [High].
To switch between handsfree mode and
During a call, touch
phone call audio between the unit and cellular
Depending on the cellular phone, this operation may
not be available.
To answer an incoming call automatically
, then set [MIC
to switch the
, then set [Auto Answer] to [ON].