Table of Contents
Advertisement
Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide
6.
Safety and Regulatory (Class A)
Intel RAID products typically have a variety of individual component level certifications; however final
regulatory compliance is based on the combination of the RAID card being within an Intel Server System.
Intended Application – The RAID products are evaluated as Information Technology Equipment (ITE) as part
of Intel's server chassis systems. These products are intended to be into Intel server systems that will be
installed in offices, schools, computer rooms, and similar commercial type locations. The suitability of this
product for other product categories and environments (such as: medical, industrial, telecommunications,
NEBS, residential, alarm systems, test equipment, etc.), other than an ITE application, may require further
evaluation. Product Safety and EMC Compliance noted below is based on the RAID product into an Intel
server.
6.1
Product Safety Compliance
UL60950 – CSA 60950(USA / Canada)
•
•
EN60950 (Europe)
IEC60950 (International)
•
CB Certificate & Report, IEC60950 (report to include all country national deviations)
•
CE - Low Voltage Directive 2006/95/EC (Europe)
•
6.2
Product EMC Compliance – Class A Compliance
FCC /ICES-003 - Emissions (USA/Canada) Verification
•
CISPR 22 – Emissions (International)
•
•
EN55022 - Emissions (Europe)
EN55024 - Immunity (Europe)
•
•
CE – EMC Directive 2004/108 EC (Europe)
VCCI Emissions (Japan)
•
AS/NZS 3548 Emissions (Australia / New Zealand)
•
•
BSMI CNS13438 Emissions (Taiwan)
KC Certification (Korea)
•
6.3
Product Environmental Compliance
Intel has a system in place to restrict the use of banned substances in accordance with worldwide regulatory
requirements. A Material Declaration Data Sheet is available for Intel products. For more reference on
material restrictions and compliance you can view Intel's Environmental Product Content Specification at
http://supplier.intel.com/ehs/environmental.htm
Europe - European Directive 2002/95/EC
•
o Restriction of Hazardous Substances (RoHS)
Threshold limits and banned substances are noted below.
Quantity limit of 0.1% by mass (1000 PPM) for:
Lead, Mercury, Hexavalent Chromium,
Polybrominated Biphenyls Diphenyl Ethers (PBB/PBDE)
Quantity limit of 0.01% by mass (100 PPM) for:
Cadmium
.
38
Advertisement
Table of Contents
