8
Parts of the display and their functions
Parts of the display and their functions
Front/Rear panel
1
No.
Name
Power Switch
1
Power-in
2
MENU
3
Ambient Light
4
Sensor
Remote Control
5
Sensor
POWER
6
AUDIO OUT
7
MIC
8
USB-1
9
USB-2
10
2
Used to isolate the power supply from the system.
• When the switch is set to ON (I), the system will
automatically enter standby mode.
• When the switch is set to OFF (O), this will completely cut
off the power supply.
Connects with the supplied power cord.
Press to open or close the sidebar menu.
Detects the ambient room light conditions to automatically
adjust the display backlight brightness.
Receives the signal from the remote control.
Press to turn the display on or off.
Connects to an external audio device (such as a speaker,
stereo system, or headphone) to output the audio that is
supplied by the video source.
Connects to a microphone.
Accesses multimedia files on USB drives directly (USB 2.0,
500mA supported).
Accesses multimedia files on USB drives directly (USB 2.0,
500mA supported).
3
4
5
6
Description
10
USB-2
9
USB-1
8
MIC
AUDIO
OUT
7