20
Parts of the display and their functions
Parts of the display and their functions
Front panel
No.
Name
Power Switch
1
Power-in
2
CO2 Sensor
3
Light Sensor
4
Motion Sensor
5
NFC Function
6
Remote Control
7
Signal Receiver
Power Indicator
8
Built-in Camera
9
Built-in Array Mic
10
Used to isolate the power supply from the system.
• When the switch is set to ON (I), the system will
automatically enter standby mode.
• When the switch is set to OFF (O), this will completely cut
off the power supply.
Connects with the supplied power cord.
Measures the increments between ppm levels. The baseline of
the measurement may shift over time.
To detect if a source of light moves toward the sensor's range.
Detects human body and trigger the eye care protection
mechanism.
NFC Sensor: NFC reader & writer.
Receives remote control IR signals. Do not obstruct the
receiver.
Shows power state.
• Power on: Blue light
• Power off: Red light
Camera for video conferences.
Microphone for video conferencing or recording.
Description
7
8