BenQ RP553K User Manual page 40

36 The OSD (On-Screen Display) menu
Power On Mode
Power Save
Mode
Boot Source
Software
Update(USB)
Restore To
Default
Sets the display to a specific power mode once the main power has been
re-supplied after a shut-down (for example a power outage). Available
options are Power Off, Last Status, or Force On.
If the mode is set to Power Off, you need to press the POWER button on the
control panel or on the remote control to turn the display on.
Sets the display to reduce power consumption automatically. Available
options are Low, High, or Off.
• Low: If the display receives no signal or any operations for 5 minutes,
the screen becomes blank until a signal is detected from the input
source.
• High: If the display receives no signal or any operations for 5 minutes, it
automatically goes into stand-by mode.
• Off: The display always keeps in power-on mode.
Sets the video source after a reboot. Available options are Last Input,
VGA, HDMI 1, HDMI 2, HDMI 3, HDMI 4, OPS, and Android.
Updates to a new version of the system software.
Restores all parameters to the factory default settings.