Page 1
ANGEL BEDSTEAD PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
Page 2
Fittings Checklist Code Description Code Description Sleeve Nut (M6x1mm) Bolt (M8x30mm) Flat Washer (6mm) Spring Washer Allen Key (4mm) Washer (22x8mm) Bolt (M8x75mm) Allen Key (5mm) Bolt (M6x40mm) Note: The following fittings will be found in the box which contains the Sprung Slat Frame. They are not in the main hardware pack, of the bed itself.
Page 3
Bed Assembly Stage & Fix legs (3) in the marked positions, on underside of headboard (1) and footboard (2) Stage Fit the bolts (I), spring washers (B) , and flat washers (C) through side rails (4 & 5) to the holes in the headboard (1) Fit the bolts (A), spring washers (B) , and flat washers as shown.
Need help?
Do you have a question about the Angel and is the answer not in the manual?
Questions and answers