Function And Control; Remote Controller Introduction - Gree GWC36LB-D3NNB2A Service Manual

Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Buttons on Remote Controller
2
3
6
9
8
12
15
14
Introduction for icons on display screen
Introduction for buttons on remote controller
Note:
After putting through the power, the air conditioner will give out a sound. Operation indictor "
After that, you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
will blink once and the air conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.
Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer
off and light functions are set, the corre- sponding icons will be displayed on the display of remote controller at the same
time); Under on status, the display will show the corresponding set function icons.
Press this button to turn on the unit. Press this button again to turn off the unit.
Press this button to increase set temperature. Holding it down above 2 seconds rapidly increases set temperature.
In AUTO mode, set temperature is not adjustable.
Technical Information
1
5
4
7
10
11
13
I feel
8 heating function
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Clock
Sleep mode
Light
:Set temp.
:Outdoor ambient temp.
Temp. display type
:Indoor ambient temp.
1 ON/OFF button
2 ▲ button
3 MODE button
SWING button
4
button
5
6
FAN button
7
TIMER OFF button
8
CLOCK button
9
TIMER ON button
10
SLEEP button
11 TEMP button
12
TURBO button
13
X-FAN button
I FEEL button
14
/
15
button
Set fan speed
Send signal
Turbo mode
ventilation operation
health function
X-fan mode
Set temperature
Set time
TIMER ON /
TIMER OFF
Child lock
Up & down swing
" is ON (red indicator).
" on the display of remote controller
11