Setting The Rear Output And Subwoofer Controller; Switching The Telephone Muting/Attenuation - Pioneer DVH-P7000 Owner's Manual

Multi-cd control high power dvd/video cd/cd player with fm/am tuner
Hide thumbs Also See for DVH-P7000:
Table of Contents

Advertisement

Available languages

Available languages

Initial Settings
2 Select the desired brightness with
E or e.
• The display shows
0
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Setting the rear output and sub-
woofer controller
This unit's rear output (rear speaker leads out-
put) can be used for full-range speaker (
) or subwoofer (
SP:FULL
tion. If you switch rear output setting to the
, you can connect a rear speaker lead
SP:S.W
directly to a subwoofer without using an auxil-
iary amp.
Initially, the unit is set for rear full-range speaker
connection (
Rear SP:FULL
When rear output are connected to full range
speakers (when
Rear SP:FULL
can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller's (low pass
filter, phase) built-in
S.W Control:INT
auxiliary
S.W Control:EXT
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 62) or subwoofer output
(refer to page 61) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
• Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
.
15
Rear
) connec-
Rear SP:S.W
Rear
).
is selected), you
or the
.
1 Press
to select
F
SW
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
2 Change the rear output setting with E or
e.
Pressing E or e will switch between
(full-range speaker) and
:FULL
(subwoofer) and that status will be displayed.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Notes
• When no subwoofer is connected to the rear
output, select
Rear SP:FULL
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
3 Change the subwoofer controller with 1
or ¡.
Pressing 1 or ¡ will switch between
and
Control :INT
S.W Control :EXT
status will be displayed.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received
using a cellular telephone connected to this
product.
1 Press
to select
F
TEL
Press
repeatedly until
F
the display.
.
appears in the
Rear SP
on the head unit also
Rear SP
Rear SP :S.W
.
.
Rear SP:S.W
Rear SP:S.W
S.W
and that
.
appears in
Telephone
En
Section
10
,
75

Advertisement

Table of Contents
loading

Table of Contents