Adjusting Initial Settings; Setting The Time - Pioneer DVH-P7000 Owner's Manual

Initial Settings

Adjusting initial settings

1
Initial settings lets you perform initial set up of
different settings for this unit.
1
display
FUNCTION
Shows the function status.
1 Press and hold until the unit turns
SOURCE
off.
• Pressing on the head unit also per-
SOURCE
forms the same operation.
2 Press and hold until time appears in the
F
display.
• Pressing and holding
unit also performs the same operation.
3 Press to select one of the initial settings.
F
Press repeatedly to switch between the follow-
F
ing settings:
— —
CLOCK WARN AUX
— —
(D.ATT) TEL DVD
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down until the unit turns off.
F
• Pressing
FUNCTION
performs the same operation.
• can only be operated when you have
D.ATT
connected the Multi-channel processor (DEQ-
P7000) to this unit. For details. refer to the
Muliti-channel processor (DEQ-P7000) owner's
manual.
on the head
FUNCTION
— — —
DIM BRIGHT SW
.
BAND/ESC
on the head unit also

Setting the time

This is used to set the time on the unit's clock
display.
1 Press to select the
F
Press until the time appears in the display.
F
• Pressing
FUNCTION
performs the same operation.
2 Select the portion of the time display you
wish to set with 1 or ¡.
Pressing 1 or ¡ will select a portion of the
clock display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Select the correct time with E or e.
Pressing E will increase the selected hour or
minute. Pressing e will decrease the selected
—
hour or minute.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
.
CLOCK
on the head unit also
En
Section
10
73