Siemens SIMATIC ET 200SP Manual page 23

Article number
vertical installation
Cable length
● shielded, max.
● unshielded, max.
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
● Diagnostic alarm
Diagnostic messages
● Monitoring the supply voltage
● Wire-break
● Short-circuit to M
● Short-circuit to L+
● Group error
Diagnostics indication LED
● MAINT LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display
● for channel diagnostics
● for module diagnostics
Potential separation
Potential separation channels
● between the channels
● between the channels and backplane bus
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
● horizontal installation, max.
● vertical installation, min.
● vertical installation, max.
Dimensions
Width
Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1)
Manual, 05/2017, A5E39265993-AA
– up to 50 °C, max.
– up to 60 °C, max.
– up to 70 °C, max.
– up to 30 °C, max.
– up to 40 °C, max.
– up to 50 °C, max.
– up to 60 °C, max.
Technical specifications
6DL1132-6BH00-0PH1
8 A
5.5 A
3 A
8 A
6.33 A
4.67 A
3 A
1 000 m
600 m
Yes
Yes
Yes
Yes
Yes; channel by channel
Yes; channel by channel
Yes; channel by channel
Yes
Yes; yellow LED
Yes; Green LED
Yes; Red LED
Yes; green/red DIAG LED
No
Yes
1 500 V DC/1 min, type test
-40 °C
70 °C
-40 °C
60 °C
22.5 mm
23