Scsi Id Settings; Single-Controller Configuration Jumper Options - Compaq AlphaServer 1000A Owner's Manual

Quick Reference
Figure 9-7 shows jumper locations for the CD-ROM drive.
Figure 9-7: RRD45 CD-ROM Jumper Locations
MA01425

SCSI ID Settings

For each configuration, the CD-ROM drive and tape drive IDs are manually set at
address 4 and 5, respectively. Fixed-drive IDs are set automatically by the
backplane.

Single-Controller Configuration Jumper Options

Table 9–8 shows the SCSI ID settings for a system with a single-controller configuration.
AlphaServer 1000A Rackmount Owner's Guide 9-13