Table of Contents
Advertisement
5.9 Reading time
This sets the time frame for one reading attempt. The time could be changed with the arrow
buttons in 0,5s steps. A new time is set by pressing the main button.
Default value
min. value
max. value
This setting is stored in the device and is still valid after power off/on operation.
For optimal reading performance this setting is recommended to be between 2-4 seconds.
5.10 Turn-off time
Sets the time until the ARE H9 will automatically shut off while no button is pressed or activity
lasts. It could be change with the arrow buttons in 5s steps.
A new time is set by pressing the main button.
Default value
min. value
max. value
This setting is stored in the device and is still valid after power off/on operation.
---------------------------------------------------------------23/36-------------------------------------------------------------
Reading Time
2.0 s
4 s
0,5 s
12,5 s
Turn-Off Time
20 s
20 s
10 s
300 s
Advertisement
Table of Contents
