Table of Contents
Advertisement
PARAMETER
0
1
5.3.4 INIT – initialization
With the command INIT all paramters of this command set are set to the default values. After that
you can save the settings with the command VSAVE.
Input format:
Output (example):
5.3.5 MC – mirror code
With this command you can change the output order of the bytes from a transpondercode.
Input format:
Output (example):
5.3.6 TOR – maximum reading time
Timeout time for the reader. TOR is used in operation mode 2 as maximum gating time for a reading
process. The length of the maximum gating time results from the equation gating_time = TOR * TB.
The time constant TB (time base) has always the default value 100ms.
Input format:
Output (example):
Parameter:
PARAMETER
00h
01h..FFh
--------------------------------------------------------------------------------24/50--------------------------------------------------------------------------------
FUNCTION
No suppression
Suppression of equal transponder numbers
INIT <CR>
ACK <CR>
MC <CR>
0 <CR>
TOR <SP> parameter <CR>
05 <CR>
FUNCTION
limits the reading process duration of exactly one reading cycle
limits the reading process duration to maximum 1..256 times
TB
Advertisement
Table of Contents
