Table of Contents
Advertisement
Example of Transponder-ID with attribute and assigned text "Stall":
5.4 Operating mode
The menu "Operating Mode" switches between the following modes: Standard, Online/USB mode
and Database/USB mode.
5.4.1 Standard mode
In the standard mode will the read transponder codes stored into the internal database of the
ARE H9. For a detailed description see section 3.3 and 4.
**)
5.4.2 Online/USB
In the online mode the transponder codes will not be stored into the internal database of the
ARE H9. The transponder codes are immediately transmitted via the USB interface to an
attached PC, PDA, etc.
It is important that there is a USB
ready to receive the data; otherwise the read transponder codes are lost because they are not
stored in this mode.
The reading process is the same as in standard mode; the second display-line shows the
information of the selected "online/USB"
processes.
---------------------------------------------------------------12/36-------------------------------------------------------------
Country-Code
ID
969 0000000001024
ISO-Fdx
Stall
type of transponder
Operating Mode
Standard
*)
or Online/BT
mode
**)
or Bluetooth
**)
or "online/BT" mode in between the reading
attribute
*)
connection established to a host-device
*)
only with optional Bluetooth module
**)
Ser. for Rs232 version
Advertisement
Table of Contents
