Set Code Format - AEG ARE H9 User Manual

5.7 Set Code Format

This menu option sets the format of representation of ISO-code. The ARE H9 currently supports
three code formats.
ISO Animal code format
ISO Industry code format
ISO BDE code format
ISO Attributs
Hexadecimal
The selection sets the way in which the transponder code is displayed.
This option has no influence to the reading function; it only filters how the read ID-code is
displayed. This setting has only impact to ISO-FDX and ISO HDX transponders.
For example, if code format is set to "ISO-Animal" and an ISO transponder without animal bit
is read the ARE H9 will signal this with 3 beeps and the following display:
The ARE H9 selects automatically the hexadecimal display if a Trovan, PSK1 or Ask64Bit
transponder is read.
This setting is stored in the device and is still valid after power off/on operation.
---------------------------------------------------------------21/36-------------------------------------------------------------
for ISO-FDX and ISO-HDX
for ISO-FDX and ISO-HDX
for ISO-FDX for waste management
for ISO-FDX and ISO-HDX with attribute display
(Like the former H5 display)
for Trovan, PSK1, ASK 64bit, ISO-FDX and ISO-HDX
Set Code Format
ISO Animal
No ISO Animal
ISO-Fdx