HP Classmate Maintenance And Service Manual page 59

Hide thumbs Also See for Classmate:

Table of Contents

Lift the tape that secures the transceivers to the sides of the bezel (1).

Remove the cables from the routing channels built into the bezel (2).

Lift the tape that secures the antennas to the bezel (3).

The bezel is available using spare part number 778822-001.

CAUTION:

When installing the display assembly, be sure that the wireless antenna cables are routed

and arranged properly.

Failure to properly route the antennas can result in degradation of the computer's wireless

performance.

17.

If you need to remove the hinges, on the bottom of the computer, remove the 2 Phillips PM2.5×5.0

screws that secure the hinges to the computer.

Component replacement procedures

Table of Contents