Wlan/Bluetooth Combo Card - HP Classmate Maintenance And Service Manual

WLAN/Bluetooth combo card

The computer uses a card that provides both WLAN and Bluetooth functionality.
Description
LiteOn/AzureWave 802.11 b/g/n 1x1 + BT 4.0 combo
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board.
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
"1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2".
2. Remove the Phillips PM2.0×4.0 screw (2) that secures the WLAN module to the computer.
26 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled
22).
Spare part number
788292-001