HP Classmate Maintenance And Service Manual page 57

Hide thumbs Also See for Classmate:

Table of Contents

11.

Removing the remaining components requires removing the display assembly from the computer. To

remove the display assembly, first remove the display hinge cover by prying the cover off with a thin

tool.

The display hinge cover is available using spare part number 764416-001.

12.

To remove the display assembly, remove the 4 Phillips PM2.0×3.0 screws (1) that secure the display to

the hinges, and then rotate the hinges upward (2) to allow enough room to remove the display from the

hinges.

Component replacement procedures

Table of Contents