HP Classmate Maintenance And Service Manual page 58

Hide thumbs Also See for Classmate:

Table of Contents

13.

Separate the display from the hinges, and then route the cables through the hole in the computer.

14.

If you need to remove the webcam, remove the 2 Phillips PM2.0×3.0 screws (1) that secure the webcam

to the bezel.

15.

Lift the webcam cable from the display to disengage the adhesive (2), lift the tape that secures the

cables to the display (3), and then remove the webcam.

The webcam module is available using spare part number 778819-001.

16.

If you need to replace the bezel or antennas, remove the display panel from the bezel (see step 8), and

then remove the antennas from the bezel as follows:

Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

Table of Contents